Soudal Yellow – LVT, PVC & Vinyl Adhesive

Description

Soudal LVT Adhesive is a universal, ready to use, solvent-free dispersion adhesive for bonding of elastic flooring materials to flat, absorbent surfaces.

Properties
– Ready for use paste
– Easy to tool, even under difficult circumstances.
– High initial tack
– Very high final strength
– Immediately walkable
– Heat resistant, also with underfloor heating
– For indoor use
– EC-1 Plus label: very low emission
– Complies to EN14259: Adhesives for floorings

Substrates
Substrates: all common porous building substrates, concrete, screed floor, brick, stone, stucco, wood.
Nature: Surfaces should be dry, level, solid and free of dust, residues of previously used adhesives, grease and oils.
Surface preparation: Shut down underfloor heating according to the correct procedures. For renovations, the existing, flexible flooring (carpet, linoleum, cushion vinyl, rubber, PVC, …) has to be removed. Make sure there is a pure surface. When renovating all old adhesive residue has to be removed mechanically. Make sure the surface is solid. Sand the surface until a solid layer is achieved (mandatory for anhydrite surfaces), also make sure that all impurities (like old adhesive residues) are removed.

If there are doubts for powder, sand or burned surfaces, a scratch test can be done. When a weak result is obtained, it’s recommended to apply Soudal WBPR-21.
Check the flatness of the surface. In general we should place a levelling layer, such as Soudal VE50. Abrupt roughness, cracks, etc are not acceptable. For strong absorbing surfaces, it is recommended to use the Soudal WBPRR-11P primer.

Right before applying the flooring, vacuum the surface thoroughly. Before applying the flooring, it should be acclimatized to the surroundings (15°C-28°C):
– Ensure that during the application the temperature and humidity of the flooring material, the adhesive, the surface and the surrounding remains stable.
– Walls and floors have to be completely dry prior to application of the adhesive. Do not plaster or paint in the surroundings during the period after application to ensure a stable environment.

We recommend a preliminary adhesion test on any substrate.

PLEASE BE ADVISED THAT THIS IS A NON-STOCK ITEM & EXTENDED LEAD TIMES ARE TO BE EXPECTED

For more in our range of adhesives, please click here, or for more products from Soudal, click here.

Alternatively, you can visit Soudals website by clicking here.