Bond It Seal It One Coat Roof Seal Cold Weather Accelerator 1L

Description

 

Seal It Accelerator is designed to be used with Seal It Liquid Membrane when applying in temperatures below 5°C (41°F) to ensure full cure at a normal speed of approximately 1mm per 24 hours. The mixing ratio is 1L of accelerator to 20L of Liquid Membrane, or for 5L of Liquid Membrane, add 250ml of accelerator. Mix the components thoroughly by hand with a slow-speed paddle, ensuring the accelerator is evenly distributed. Avoid mixing too quickly to prevent introducing air, which can cause pin-holing in the final coating.

 

Key Points:

1. Ensures full cure of Seal It Liquid Membrane at temperatures below 5°C.
2. Mixing ratio: 1L accelerator to 20L Liquid Membrane or 250ml for 5L of Liquid Membrane.
3. Mix thoroughly by hand to avoid air bubbles and pin-holing.
4. Easy-to-use additive that activates when stirred in, working effectively in cold weather.

 

Shelf Life: 12 months from the date of manufacture when stored in original, sealed bottles.

Storage Conditions: Store between +10°C and +25°C in the original, unopened packaging. Once mixed with ROOF SEAL, the product will begin to cure. It is recommended to use the entire tub during installation to prevent the product from skinning over or becoming lumpy if left exposed to air for too long. Keep the product protected from frost and direct sunlight.

 

 

 

For more in our range of bitumens, please click here. For our full range of products from Bond It, please click here.

For more information on Bond It and their products, you can visit their website here.